24-Volt Trolling Motor Battery
24V lithium trolling motor batteries — steady power in a compact design to keep you focused on the next cast.
Products in this collection
-
POWER YOUR PURSUIT™
POWER YOUR PURSUIT™
POWER YOUR PURSUIT™
-
POWER YOUR PURSUIT™
POWER YOUR PURSUIT™
POWER YOUR PURSUIT™
FAQ
-
Can I reuse my existing charger?
Only if it meets the selected battery’s voltage, lithium charging profile, current, and wake-up requirements. A charger arranged for two separate 12V batteries should not be assumed compatible with one 24V battery. Check with ABYSS or choose an appropriate 24V lithium charger.
-
Should I choose a 60Ah, 90Ah, or 110Ah battery?
Start with motor requirements, fishing time, and available space. The 60Ah offers a compact Group 24 case, while the 90Ah provides more capacity in a Group 31 case. The 110Ah NMEA 2000 model adds further capacity and compatible helm monitoring. Check each model’s dimensions before choosing.
-
Will a 24V battery work with a 36V trolling motor?
Only if the motor manufacturer supports operation at 24V. Some motors accept multiple system voltages, while others require a specific voltage. Check your exact motor model and operating requirements before selecting a battery.
-
Do all ABYSS® 24V batteries connect to my chartplotter?
Choose the 24V 110Ah NMEA 2000 model for supported battery readings on a compatible marine display. You’ll need an appropriately powered and terminated NMEA 2000 network, the correct connections, and a display that supports the battery data. The 60Ah and 90Ah models’ Bluetooth monitoring connects to a compatible phone.
-
Can one 24V lithium battery replace two 12V trolling motor batteries?
Yes. A suitable ABYSS® 24V lithium battery can replace two 12V lead-acid or AGM batteries wired in series for a compatible 24V trolling motor. Match the battery’s capacity, discharge rating, dimensions, and charging requirements to the installation.
-
How long will a 24V lithium trolling motor battery run my motor?
Estimate runtime by dividing usable amp-hours by average motor current. For example, 60Ah allocated to a motor averaging 15A gives about four hours. That is a planning example, not a runtime promise. Wind, current, boat load, speed settings, and reserve capacity change the result; maximum motor draw is different from an average fishing-day load.
-
What wiring and circuit protection should my installer check for a 24V upgrade?
Review the motor’s required cable size and circuit protection, the full cable run, plugs, battery switch, terminal fit, and battery restraint. A battery’s internal BMS does not replace the motor circuit’s specified fuse or breaker. Check voltage ratings as well as current ratings, and use the exact motor and battery installation instructions.
-
Can I recharge my 24V trolling motor battery while the outboard is running?
A compatible 24V DC-DC alternator charger can use energy from the boat’s 12V starting system to charge the trolling battery. Available charging depends on alternator capacity after the boat’s other loads and on engine run time. Match the charger to both battery systems; do not connect a 12V alternator directly across a 24V battery.
Make Room for More Fishing
24V LITHIUM TROLLING MOTOR POWER
BLUETOOTH AND NMEA 2000 OPTIONS
Your Power, in View
BLUETOOTH AND NMEA 2000 OPTIONS